HARDSCAPE ACCESSORIES
Lee Building Products carries a full line of hardscape accessories including polymeric sands, cleaners, sealers, edging, and other products to help make your job easy.
Product availability may vary by location. Contact or stop into your nearest Lee Showroom for more information.
Products
Binding Agents
Mixed Gator Rock Bond with 100% washed and dried river stone creates a durable permeable and decorative surface. Great for garden pathways where erosion and drainage are a concern, at the same time, it reduces maintenance and clean-up and is durable in extreme conditions.
- Porous and permeable
- Keeps stones in place
- Reduce maintenance and clean up
- Durable in extreme conditions
- Durable in extreme conditions
- Solvent-free
- Easy to apply and easy to repair
- Superb U.V. and weathering resistance
Ideal For:
- Banding, edging, and trimming.
- Pathways.
- Walkways.
- Tree wells.
Cleaners
Gator Clean XP Oil and Grease Remover easily removes tough stains such as motor oil, cooking oil & grease. Just shake the bottle, spread it on the stain, let it dry, and sweep it up. Use it on concrete, pavers and stones. Not recommended for synthetic oil stains. Gator Clean XP Oil and Grease Remover is biodegradable and phosphate-free. Shake it, Spread it (let it dry), Sweep it!
- Concrete pavers, wet cast & natural stones
- Easily lifts & absorbs embedded oil stains as it dries from liquid to powder
- No scrubbing
- No rinsing
- No mess
Gator Efflorescence Cleaner will remove any efflorescence stains trapped in the concrete pavers and natural stone pores. It will make the pavers look cleaner and more vibrant. This efflorescence cleaning is a necessary step before a sealer is applied. The sealer will be able to get a deeper penetration into the now-clean pores.
Joint Sand
Gator Nitro Joint Sand is a ready-to-use mixture of calibrated sand and resins which cure when exposed to air, hardening from top to bottom of the joint *. The product can be installed in wet or dry weather, in joints ranging from a minimum 3/16” (5 mm) to a maximum 2” (50 mm) joint width. The minimum joint depth is 1” (25 mm).
* Gator Nitro Joint Sand will harden from top to bottom up to 2 3/8’’ (60 mm).
- Apply in wet or dry weather
- Strength from top to bottom *
- Permeable **
Polymeric Sand
GATOR TILE SAND is a unique mixture of polymer binders and calibrated sand available in Beige, Slate Grey, Ivory and Black Diamond. Once GATOR TILE SAND sets, it becomes very firm and locks between the porcelain tile joints while still retaining flexibility and providing a long lasting, durable jointing material. GATOR TILE SAND is recommended for a variety of pedestrian uses including pool decks, patios, footpaths etc. This product is for use exclusively with the Gator Tile System. It is not for use with porcelain tile laid directly on concrete, or directly on an aggregate or sand bedding foundation.
- Can be used for joints up to a maximum of 1 inch (2.5 cm) and its fine gradation allows use in even the tightest joints
- Traditional applications, Rain safe 1 hour after water activation
- Overlays applications, Rain safe 24 hours after water activation
- Works above 32oF (0oC)
- Waterproof bag: Intact pallets or bag can be laid flat and stored outdoors. (Lay bag flat on its back, so front of the bag is facing you.)
Helps prevent
- Helps prevent weed sprouting.
- Helps prevent damages caused by insects.
- Helps prevent erosion due to climatic conditions, such as wind, rain and freezing temperatures.
GATOR MAXX G2 is made with a state-of-the-art manufacturing process. Specifically, calibrated sand is mixed with sophisticated intelligent polymers. This new generation of Intelligent Polymers neutralizes haze and dust. The polymeric sand application is now dust free and haze free. No blower is needed and the intelligent polymeric sand requires only one watering. GATOR MAXX G2 is recommended for a variety of uses including pool decks, patios, footpaths, driveways, parking spaces, pavements, etc. Available in Beige, Slate Grey, Ivory and Black Diamond. Ideal for concrete pavers, natural stones, wetcast products and clay pavers.
(FOR RESIDENTIAL AND COMMERCIAL APPLICATIONS)
- Can be used for joints up to a maximum of 4″ (10 cm) in traditional application and 2″ (5 cm) in overlay application
- For traditional, overlay, residential and commercial applications
- ASTM C144 gradation allows use in even the tightest joints
- OSHA cristalline silica compliant (OSHA 29 CFR 1926.1153)
- No Dust, Haze Free, No Blower, and one watering
- For traditional application, Rapid Set rain safe 15 minutes after water activation.
- For overlays, rain safe 24 hours after water activation.
- Works above 32°F (0°C)
- Faster insallation time
- Ideal for Gator Base applications
- Can be used on false joint pavers
- Waterproof bags. Lay bag flat on its back, so front of the bag is facing you. Intact pallets or bags can be stored outdoors.
Sealers
GATOR HYBRID SEAL ZERO GLOSS is 100% pure high-grade acrylic used to seal concrete pavers. It penetrates deep into the concrete paver pores, thus reducing the oil and dirt penetration, as well as protecting them from the corrosion of de-icing salt.
- Zero gloss
- No color enhancement
- Works above 40ºF (5ºC)
- Will not discolor
- Breathable
- Film former
- Joint stabilizer
- Can be applied on damp surface
- Rain-safe after 24 hours
- Zero Gloss finish
- Dry cast pavers
- Corrosion from De-Icing Salt
- Ultraviolet Ray Effects.
- Motor Oil & Grease Stains.
GATOR HYBRID SEAL LOW GLOSS is 100% pure high-grade acrylic used to seal concrete pavers. It penetrates deep into the concrete paver pores, thus reducing the oil and dirt penetration, as well as protecting them from the corrosion of de-icing salt.
- Low gloss
- No color enhancement
- Works above 40ºF (5ºC)
- Will not discolor
- Breathable
- Film former
- Joint stabilizer
- Can be applied on damp surface
- Rain-safe after 24 hours
- Low Gloss finish
- Dry cast pavers
- Corrosion from De-Icing Salt
- Ultraviolet Ray Effects.
- Motor Oil & Grease Stains.
